APSV-100-A Hydraulic Selector Valve
FEATURES:
The APSV-100-A is a 3-way, 2-position hydraulic selector valve designed to direct flow from one pump to either of two hydraulic circuits.
Designed for multiple mobile equipment applications
Metering notches for smooth transition when shifting the valve
For use in single or double acting applications
The APSV-100-A is a 3-way, 2-position hydraulic selector valve designed to direct flow from one pump to either of two hydraulic circuits.
Designed for multiple mobile equipment applications
Metering notches for smooth transition when shifting the valve
For use in single or double acting applications
APSV-100-A
Hydraulic Selector Valve
Hydraulic Selector Valve
3-way, 2-position
TECHNICAL:
Flow Rate = up to 60 gpm
Max working pressure = 4000 psi
Ports = SAE-16 ORB
Mounting = two Ø0.4” thru holes (ability to mount valve in any position)
Actuator = Pneumatic, direct mount eliminates mis-alignment issues, no exposed moving parts.
MATERIALS:
Body = Ductile Cast Iron
Spool = Chrome plated steel
Seals = Buna-N
TECHNICAL:
Flow Rate = up to 60 gpm
Max working pressure = 4000 psi
Ports = SAE-16 ORB
Mounting = two Ø0.4” thru holes (ability to mount valve in any position)
Actuator = Pneumatic, direct mount eliminates mis-alignment issues, no exposed moving parts.
MATERIALS:
Body = Ductile Cast Iron
Spool = Chrome plated steel
Seals = Buna-N
Operation: Flow enters the valve at the inlet port. When the actuator is pushed in, the spool shifts allowing inlet flow to reach the work port furthest away from the actuator. When the actuator is pulled out, the spool shifts allowing inlet flow to reach the work port closest to the actuator.
Join Us
Mailing Address:
APSCO
PO Box 470948
Tulsa, OK 74147
APSCO
PO Box 470948
Tulsa, OK 74147